Cutting in involves manually drawing straight lines of paint alongside elements that do not get painted, eliminating the need for masking tape or painters masking film.

When and Why to Cut In

Imagine that you want cream trim around your windows, surrounded by darker colored walls. First, you paint the trim. Then, when you paint the walls, you need to bring the paint line right up to the edge of the trim. You could mask off the trim with tape, but if you have a steady hand, you can simply “draw” the line of colored paint freestyle.

Window trim is just one example. You can cut in along baseboards and other types of trim, as well as the corners where walls meet ceilings or they meet walls of a different color. The benefits of cutting in apply in all of these situations:

  • The opportunity to get to painting immediately with minimal preparations
  • The instant gratification of seeing the colors right away and can make adjustments, if necessary
  • Reducing your cost because you are not buying expensive painter’s tape
  • No time spent waiting for the paint to dry before you can remove the tape

Tools and Supplies You Will Need

The only specialty supplies you need for cutting in are a two-inch brush and a “cut bucket.” Pros recommend an angled brush, often called a sash brush. A cut bucket is simply a paint bucket that has no lip. The lip allows for paint to accumulate, giving you more paint than you want on the brush. Even a plastic bucket will work—just any sturdy bucket with straight sides.

  • High-quality, two-inch sash brush
  • Cut bucket
  • Sandtex paint
  • Clean white rag
  • Warm water

How to Cut In

  • Fill a cut bucket with no more than 1/2 inch of paint. Keep the sides of the bucket clear for wiping off excess paint from your brush.
  • Dab the tip of the brush into the paint, and drag the bristles against the edge of the bucket to remove excess paint. The brush should be relatively dry. It does not take much paint to cover the trim.
  • Grip the brush loosely near the bristles, similarly to gripping a pencil. Place the bristles on the surface, forming a wedge shape. Use the sharp end of the wedge to start the paint line. Draw the bristles along the line you want to paint. As you begin moving the bristles, try to let them form a fan shape. The outermost bristles are actually drawing the line, not the entire bristle surface.
  • You will first want to draw very flat crescents. These crescents will start slightly away from the line, move over and track along the line for a few inches, then gradually pull away from the “danger zone” (glass, trim, or whatever that is not getting painted) and toward yourself. You can cobble together a long straight line through several of these flat crescents.
  • As you get more experienced, you will find the crescents getting fewer and flatter until you can draw quite a long line with a single linear brush motion.
  • Use a clean, white rag slightly dampened with water to wipe off paint that gets onto unintended surfaces or to clean up a messy line. If you wipe the paint as soon as it’s applied, it will come off with no trouble. Waiting just a few minutes can make it harder to remove. For this reason, it’s a good idea to keep a damp rag handy at all times.

 Reference: thespruce.com

Check Also


  My wife and I welcomed our first child last month. It was the greatest …

Leave a Reply

Your email address will not be published. Required fields are marked *

Don't miss out!
Subscribe To Our Newsletter
Be the first to get colourful updates of
exclusive content straight to your email inbox.
Yes, I want to receive updates
No Thanks!