COLORCRETE

•  BOLD TEXTURED CEMENT BASED FINISH Colorcrete is a coloured Portland cement using BS1014 pigments, which satisfies the requirements of B.S.12 Portland cement specification. When mixed with sand and water and applied by simple hand operated machine, it creates an “open”textured honeycomb (Tyrolean) finish, which does not craze or readily absorb moisture. Colorcrete tyrolean finish is suitable for a wide range of situations including shopping precincts, business premises, theatres, hotels, sport centers, etc. Colorcrete can also be used to form attractive terrazzo flooring using aggregates such as marble chippings, quartzite, spar or hard limestone, etc. These floorings require the correct ratio of Colocrete to aggregate to ensure the hard durable finishes required. •  FINISHES - Colorcrete Tyrolean: open honeycombed textured (machine applied). - Colorcrete Rubbed Tyrolean: smoothed honeycombed Textured (machine applied and rubbed). - Colorcrete/Cemprover: stipple finish (brush applied). - Colorcrete pointing. •  COVERING CAPACITY Approximate coverage are: Tyrolean finish: 10m 2 /50kg (12yd 2 /50kg) Stipple finish: 12-20m 2 /50kg (15-25yrds 2 /50kg) plus 4.5 liters (1 gallon) Cemprover for walls and 7.5liters (1 ¾ gallons) soffits. Pointing at 4 courses/300mm (1foot) 7.5m 2 /50kg (9yrd 2 /50kg). •  SUITABLE BACKINGS Concrete bricks and blocks, calcium silicate bricks, concrete, cement sand renderings, well braced asbestos cement sheeting. •  COLOUR RANGE Ivory white, Light cream, Cream, Yellow, Orange, Khaki, Buff, Brown, Pink, Red, Terracotta, Light green, Anome green, Blue (not recommended for exposed conditions); silver gray, French gray. Although only pigments of the highest quality are used, they can vary and it is therefore, regretted that no responsibility can be accepted if an exact match is not obtained. The exact colour is unsuitable for application to previously decorated surfaces. Packing 50kg bags Storage Not to exceed 6 months. < Back