INTRODUCTION
It is a general purpose primer on exterior and interior of steel, mild steel and metals preferable ferrous, in mildly to moderately corrosive environment.
• RED OXIDE PERFORMANCE HIGHLIGHTS
Has excellent obliteration capacity.
Has high build effect on substrate.
Ability to resist corrosion for five years and above.
Low cost anti corrosion property.
• USES
Red Oxide has been formulated as a universal anti corrosive and shop primer for ferrous metal exterior and interior application. Red Oxide Primer should under no circumstance be applied to wood, glass, plaster cement rendering, concrete, asbestos and non-ferrous metals. It is not suited for permanent immersion or in association with impressed current. Cathodic protection.
• APPLICATION
Application method : Airless spray, Air spray and Brush/Roller.
Thinner: general purpose thinner
Thinner (max vol.): 5%
Indicated film thickness; dry: 40microns
Indicted film thickness; wet: 75microns
Recoating interval: 5hrs. Minimum
• APPLICATION CONDITIONS
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
Service temperatures: maximum, dry: 1000C/2120F.
• PHYSICAL CONTENTS
Colour/Shade : red
Finish : flat
Volume solids : 55%
Theoretical spreading rate: 12m 2 /ltr on a smooth non absorbent surface.
Flash point : 38 0 C
Specific gravity : 1.0kg/ltr
Dry to touch :2-4hrs at 200C
Shelf life : store in cool conditions for not more than 12 months.
PACKING
Supplied in 4litre container.
SAFETY
• Handle with care, harmful or fatal if swallowed.
• Avoid inhalation of possible solvent vapor or paint mist, as well as contact with the skin and eyes.
• Apply precautions against the risks of fire and explosions.
< Back
|
