•  INTERIOR/EXTERIOR WALL PAINT
The emulsion binder is based on the development of a terpolymer resin using new technology. Vinyl Matt is incorporated with biocides to protect against unsightly mould growth in humid conditions. A brush or lambs wool roller can be used to apply the product and when dry the opacity or covering power is excellent. It is advisable to use 2 coats of paint to ensure a full-bodied overall finish.

•  COVERING CAPACITY
As a guide and theoretically, one liter at one coat will cover 10-12m 2 of smooth non-absorbent surfaces when used as an undiluted single coating. For absorbent surfaces (i.e. cement rendering) thin the paint appropriately with clean water for the first coat. Then use the product as supplied for subsequent coats. It is available in premium (double quality) and consumer market standard quality.

•  SUITABLE BACKING

• New plaster
• Dry lining boards
• Anaglypta or wood chip wall coverings
• Brickwork
• Smooth concrete
• Previously painted substrates

NOTE: Old or blistered paint must be removed and old gloss paint must be fully ‘flattened' using abrasive paper.

•  COLOUR RANGE
Off white, Magnolia, Cameo, Sienna, Minium, Dusky Pink, Light Cream, Peach, Barley, Pale Vermilion, Cinnabar, Etruscan Red, Beige, Hazel Brown, Midstone, Dark Mushroom, Bitter Chocolate, Olive Drab, Spray Green, Leaf Green, Lovat Green, Silver Grey, Pale Grey, Dark Grey, Stone Grey, Sun Yellow, Orpiment, Light Blue, Nursery Blue, Solent Blue. Other non-stocking colours are available on request.

•  STORAGE
Vinyl Matt has an excellent shelf life when stored at room temperature in closed containers. However, once the container has been opened the contents should be used as quickly as possible.

•  PACKING - 4 Litre and 20 Litre container.

•  DESCRIPTION
Sandtex wall satin is a water borne, acrylic dispersion based paint. It dries to a non-yellowing and glossy coating with low dirt pick up, good weathering properties and high gloss retention.

•  RECOMMENED USE
It can be used as a glossy finishing coat in water borne paint systems and interior of buildings. For use on buildings, the relative high resistance to diffusion of water vapor and carbon dioxide should be taken into consideration.

•  PHYSICAL CONTENTS
White and other shades according to request.
Finish - Glossy
Volume of solid% - 43
Theoretical spread rate - 5-6 square metre/Ltr.- 75 microns
Flashpoint - 70 o C
Drying - Touch dry ½ -1hr. over coating time 2-3hrs

•  APPLICATION DETAILS
Application Method
Airless spray, brush